Kenmore Elite Front-Load Washer in Tarpon Springs: Black, Moldy Door Gasket Replaced

- Symptom
- The rubber door gasket was black with dirt and buildup.
- Cause
- Years of moisture and residue collecting in the gasket and the channel behind it.
- Fix
- Took the front panel off and replaced the gasket. The clients supplied the new gasket.
The clients in Tarpon Springs had a Kenmore Elite front-load washer with a very dirty door gasket, and they decided to have it replaced. They supplied the new gasket.
The old gasket
When we opened the door, the gasket was dark with dirt and buildup, and so was the rim of the opening around it.
The replacement
We took the front panel off the washer to get at the gasket. Here it is with the old gasket still in place.
Then the new gasket, fitted.
Once the gasket was on and the washer was back together, it was done.
If the seal on your washer is turning black, call us. Our washer repair service covers Tarpon Springs, Palm Harbor, Trinity and nearby.
FAQ
Can I supply my own washer door gasket?
Yes. On this Kenmore the clients had the new gasket ready and we did the installation. We take the front panel off, replace the gasket and put the washer back together.
Why does the gasket on a front-load washer get black?
Moisture and detergent residue stay in its folds and in the channel behind it. Over time that builds into dark mold and grime. Here it had spread across the whole gasket and the rim of the tub opening.