KitchenAid Built-In Double Oven Dead in Tarpon Springs: Display Board Problem

- Symptom
- Built-in double oven completely dead: display not working and nothing lit.
- Cause
- A problem with the display board.
- Fix
- Not repaired on this visit. The replacement display board wasn't available.
This KitchenAid built-in double oven in Tarpon Springs was completely dead. The display wasn’t working and nothing lit up on either oven. It’s a model KODE900HSS00.
Looking inside
To get at the electronics we pulled the oven out of the cabinet. On top of the oven there are two control boards, one for the upper oven and one for the lower, and a third board next to them. The display board with the screen and touch controls sits behind the front panel.
What we found
We went through the wiring and the boards and found a problem with the display board. We also looked at the wiring diagram that came with the oven. We typed it up as a KODE900HSS00 wiring diagram guide.
Where it stands
The replacement display board wasn’t available, so we couldn’t repair the oven on this visit. We’d rather say that than leave it out. If your built-in double oven has a dead display and nothing lights up, our oven repair service can find out whether it’s the display board, and we’ll tell you honestly about the part.
FAQ
Why is my double wall oven completely dead, with a dark display and no lights?
On this KitchenAid in Tarpon Springs we traced it to the display board. We also looked at the wiring diagram to see how the display board and the control boards connect.
Can every oven repair be finished on the first visit?
No. Here we found the problem, but the replacement display board wasn't available, so the oven wasn't repaired on this visit.