Midea Dishwasher Won't Start, Light Blinking, in Palm Harbor: Hidden Leak Found

- Symptom
- Dishwasher wouldn't start. A light blinked fast and it beeped, and when the door was closed it started to drain.
- Cause
- Water leaking from a hose between the drain pump and the plastic housing where the hoses connect and the water level sensor sits.
- Fix
- We found the leak, but the owner decided to replace the dishwasher instead of repairing it.
This Midea dishwasher in Palm Harbor wouldn’t start. A light on the control panel blinked fast and the dishwasher beeped. When the door was closed, it started draining, which pointed to a drain problem. It’s a model MDT24H3AST from about 2021.
Pulling it out
We pulled the dishwasher out of the cabinet and looked underneath, where the pumps and hoses are. The area around the water level sensor was wet.
Finding the leak
To find where the water was coming from, we disconnected the sensor and ran the dishwasher. The leak was in a hose between the drain pump and the plastic housing where all the hoses connect. That housing is also where the water level sensor sits.
Where it stands
The owner decided to replace the dishwasher rather than repair it. If your dishwasher beeps, blinks a light and won’t run, our dishwasher repair service can find out whether it’s a leak, a pump or a sensor.
FAQ
Why does my dishwasher beep, blink a light and start draining when I close the door?
That usually points to a drain or water level problem. On this Midea in Palm Harbor there was water where the sensor sits, and the leak behind it was the cause.
How do you find a leak inside a dishwasher?
We pulled the dishwasher out, looked at the area around the sensor, and disconnected the sensor so we could run it and watch where the water came from. The leak was in a hose between the drain pump and the plastic housing where the hoses connect.