Repair Stories

Whirlpool Dryer Not Heating in Safety Harbor: Heating Element Replaced on Site

White Whirlpool top-load electric dryer with a glass door next to a white LG top-load washer in a Safety Harbor laundry room
Symptom
Dryer ran but didn't heat.
Cause
Failed heating element.
Fix
Replaced the heating element with a Whirlpool factory part, on site.

This Whirlpool electric dryer in Safety Harbor was running but not heating, so we came out and fixed it on site.

What we found

We took the dryer apart from the front to get at the heater housing, with the new Whirlpool factory part waiting on top.

Whirlpool dryer opened up with the drum and front panel exposed, a Whirlpool factory certified parts box and a tray of screws on top

Inside the housing, the heating element is a coil of wire on ceramic insulators. This one had scorch marks and dust baked around it.

Close-up inside the dryer heater housing, showing the heating element coils on white ceramic insulators with burned residue and dust around them

The repair

We replaced the heating element. Here are the old and new elements next to the part box.

Two dryer heating elements on a tile floor, the old dark one on top and the new bright one below, next to a Whirlpool factory certified parts box

The dryer is back together and working.

The finished Whirlpool dryer next to the LG washer in the laundry room

If your dryer runs but doesn’t heat, call us. Our dryer repair service covers Safety Harbor, Palm Harbor, Oldsmar and nearby.

FAQ

Why does my Whirlpool dryer run but not heat?

A failed heating element is a common cause on an electric dryer. The drum still turns, but there's no heat.

Can a dryer heating element be replaced in one visit?

Yes. We had the part with us for this Whirlpool and finished the repair on site.

See more appliance repairs in Safety Harbor →

More dryer repairs

Dryer repair service →