Samsung Dryer That Won't Shut Off in Clearwater: Motor Relay Replaced on the Control Board

- Symptom
- The dryer wouldn't shut off and the motor kept running.
- Cause
- The motor relay on the control board had failed. This is a known problem on these Samsung dryers.
- Fix
- Replaced the relay on the control board on site, instead of replacing the whole board.
A Samsung dryer in Clearwater had a problem the owner had lived with for a while: it wouldn’t turn off. The motor kept running.
A known problem
On these Samsung dryers the cause is usually the motor relay on the control board. It’s a known failure. Here are the board’s relays, with the failed one still in place.
Repairing the board
A new control board is expensive. So instead of replacing the whole board, we replaced just the relay, on site.
Here are the two relays: the old one, with solder still stuck to its pins, and the new one.
With the new relay on the board, the dryer shuts off the way it should.
If your dryer won’t turn off, call us. Our dryer repair service covers Clearwater, Palm Harbor, Dunedin and nearby.
FAQ
Why does my Samsung dryer keep running and not turn off?
On these Samsung dryers a motor relay on the control board is a known failure. When its contacts stick, the motor keeps running. That's what we found here.
Can a dryer control board be repaired instead of replaced?
Sometimes. When the failed part is a relay, it can be replaced on the board. Here we did that on site, which cost much less than a new board.