LG Washer-Dryer Combo in Clearwater: Stuck Drain Filter Turned Into a Broken Pump Housing
- Symptom
- Drain filter stuck, then broken while trying to remove it.
- Cause
- The filter cap broke and the housing around it was damaged during removal.
- Fix
- We carefully removed the broken pieces. The housing needs replacing, and it comes as one assembly with the pump and filter.
This one is a good reminder to stop when a part won’t budge. The owner of this LG all-in-one washer and dryer combo in the Countryside Mall area of Clearwater tried to clean the drain filter. It got stuck.
What happened
First the filter cap broke. Then, while trying to dig the rest out, the filter and the housing around it got damaged. The owner worked at it a few more times and still didn’t get it all the way out, and the plastic housing got torn up in the process.
What we did
We carefully pulled out what was left. Here’s the housing after that, with lint and hair around the opening.
The owner wants to try putting a filter back in. We told them it will most likely leak, because the housing is damaged. The real fix is replacing the housing, and LG sells it as one assembly with the pump and the filter, so there’s no buying the housing alone.
The takeaway
If a drain filter won’t come out, don’t dig at it. Had we been called right away, this would have been a simple filter replacement. Now it’s the whole assembly. Our washer repair service can handle a stuck filter before it turns into a bigger job.
FAQ
My LG washer drain filter is stuck. Should I keep forcing it?
No. Forcing it is how the cap and the housing around it can break. If the filter won't turn, stop and call a technician.
Can the drain filter housing on an LG washer be replaced by itself?
On this LG, no. The manufacturer supplies the housing together with the pump and the filter as one assembly.